HP Pavilion x360 15-cr Touch + LCD Screen Replacement
-
Screen Size: 15.6-inch diagonal.
-
Resolution: Full HD (1920 x 1080) IPS.
-
Connector: 30-pin eDP (Bottom Right position).
-
Compatible Part Numbers: L20822-001, L20824-001, L20826-001, L22430-001.
-
Touch Type: 10-point capacitive multi-touch.
-
Aspect Ratio: 16:9.
HP Pavilion x360 15-cr Touch + LCD Screen Replacement
The HP Pavilion x360 15-cr Touch Screen Replacement is the full display assembly for the 15-cr series (e.g., 15-cr0037wm, 15-cr0053wm, 15-cr0091ms, 15t-cr000). This part is a "Full Combo" featuring the 15.6-inch LCD panel, the capacitive touch digitizer glass, and the internal control board factory-bonded together. The HP Pavilion x360 15-cr Touch + LCD Screen Replacement Price in Kenya is KSh 19,980.
Who Should Buy This Screen? This is the correct replacement for Pavilion 15-cr users experiencing a shattered glass surface, "ghost touches," or an LCD with vertical lines/black spots. As a convertible 2-in-1, the 15-cr relies on this assembly for its tablet and tent modes. At KSh 19,980, this part restores the original Full HD clarity and precise touch response required for both students and creative professionals in Nairobi.
HP Pavilion x360 15-cr Price Table
| Product | Model Compatibility | Size | Resolution | Price (KSh) |
| HP Touch + LCD Assembly | Pavilion x360 15-cr Series | 15.6-inch | 1920 x 1080 (FHD) | KSh 19,980 |
Technical Specifications
| Feature | Specification |
| Compatible Models | HP Pavilion x360 15-cr0xxx, 15t-cr000, 15-cr0010nr |
| Part Numbers | L20826-001, L20827-001, N156HCA-EBB |
| Display Technology | IPS LED-Backlit (UWVA) |
| Resolution | Full HD ($1920 \times 1080$) |
| Connector Type | 30-Pin eDP (Bottom Right) |
| Brightness | 250 - 300 nits |
| Finish | Glossy (Touch Glass) |
| Touch Support | 10-Point Multi-touch (Active Pen Supported) |
Key Professional Features
-
Vibrant IPS Display: Restores the "Ultra Wide Viewing Angle" (UWVA) technology, ensuring that your content remains clear and color-accurate from any angle, which is crucial for 360-degree usage.
-
Precision Touch Digitizer: Engineered to support Windows 11 multi-touch gestures and active styluses (MPP protocol) for fluid digital note-taking and sketching.
-
Scratch-Resistant Glass: The assembly features chemically-strengthened glass designed to withstand the daily friction of finger contact and stylus pressure.
-
Micro-Edge Bezel Compatibility: Designed to fit perfectly within the slim-bezel chassis of the 15-cr series, preserving the modern, edge-to-edge aesthetic.
-
Integrated Digitizer Board: Includes the pre-installed touch control PCB, ensuring immediate plug-and-play responsiveness without additional calibration.
Important Installation Notes
[!CAUTION]
Connector Check: This version uses a 30-pin eDP connector. While most 15-cr models are FHD, always verify your original resolution. If your laptop was a rare 4K variant, the cables will not be compatible.
Battery Safety: You must disconnect the internal 3-cell 48Wh battery before installing the display. "Hot-plugging" the eDP cable can result in a blown backlight fuse on the motherboard.
Bezel Re-use: This assembly is the LCD + Touch combo. You will need to carefully transfer your original outer plastic bezel using light heat and a plastic pry tool to avoid snapping the delicate clips.
Pros and Cons
| Pros | Cons |
| Full HD IPS clarity and wide viewing angles | Lower brightness than high-end Spectre models |
| Perfect 10-point touch response | Glossy finish can be reflective in direct sunlight |
| Supports HP Active Pen/Stylus | Requires careful bezel transfer during install |
| Genuine-fit 30-pin plug-and-play |
Conclusion
The HP Pavilion x360 15-cr Touch + LCD assembly is the most reliable way to restore the premium versatility of your laptop. For KSh 19,980, you regain a high-definition, interactive display that works exactly like the original factory panel
| Shipping Cost |
|
| Shop Location | Kenya |
